A Meter High By The Fourth of July

Corn

Corn Field In Iowa — July 2015

By The Metric Maven

Bulldog Edition

This last Fourth of July, I took a long drive back to the small Iowa town where I spent some of my early years. The mind has plenty of time to wander and as I turned off of the interstate and saw all the fields of corn and soybeans, a life-long cliche automatically intruded. It is “knee-high by the Fourth of July.”  It suddenly struck me this was a saying that involved measurement, but one had to wonder just how good this aphorism is. When I consulted Wikipedia I found true understatement:

In the United States, a good harvest was traditionally predicted if the maize were “knee-high by the Fourth of July“, although modern hybrids generally exceed this growth rate.

I estimate that much of the corn in my home county was about one-meter high on the Fourth of July. When I measured my “knee-high” length, it is about 500 mm, so this means modern corn is about twice the size it was when this phrase was coined.

My stream of consciousness connected with a pair of other measurement based incidents that took place in my hamlet. The town has a small soda fountain in the local drugstore, and did when I was a boy. One of the other local boys pointed out that if you ordered two small sodas, the total volume was about half as much larger than the single large soda. In other words if the large soda was 200 mL, the two small sodas were each about 125 mL or 250 mL total. The price of two small sodas was the same as the large soda. When I realized this was true, I felt odd ordering two smalls, and sitting at the soda counter sipping them down. I felt like I was doing something very untoward. Others began to order the same way, and apparently the proprietor realized what was happening and eliminated the small soda from the menu.

I drove along the old highway past Blairsburg Iowa where there is a large wind farm. There are wind generators as far as the eye can see. About 27% of Iowa’s electricity is generated with wind power. According to Wikipedia, in 2014 Iowa’s Wind Farms generated about 59 Petajoules of Energy. When I was a boy, these were all corn and soybean fields. They are still dominated by crops, but now the fields are punctuated with wind generators.

As I thought about change, a story came to mind that illustrated a problem that those who would introduce change face. One day a contractor was attempting to set stakes into the ground to create a form so that he could pour a concrete slab for a garage entrance. He kept adjusting the stakes and then trying to check to see if they were square. This process was progressing very slowly. My father pointed out that if you took the width between the stakes, and the length you were trying to achieve, square each number, add them, and take the square root, the result will be the diagonal length between corner stakes when they are square. When the two diagonal distances are equal (and equal to the value computed) then it should be square. Alternatively one can design a pad with 6 x 8  foot sides which have a 10 foot diagonals and eliminate any computation whatever. When both diagonals are 10 feet, it should be square

The contractor had been doing this type of work for decades, and exploded. He did not want to be told how to do his job. After much discussion, the contractor calmed down and finally decided to consider looking at the method. Quite often fear of ignorance can cause visceral reactions. People underestimate the amount of measurement which is performed each day in our modern world, and because of this, the importance of measurement methods is diminished and often dismissed.

While I was in town, I attended a breakfast sponsored by the local fire department. This is a social function where I often run into people I’ve known since childhood, and that Sunday was no different. I was quite pleased (and surprised) that a local computer technician told me he has been reading my essays for sometime. A local attorney dropped by my table to verify I am the Metric Maven and told me he found a lot of my essays of great interest. His countenance then became a bit serious and filled with concern. “You realize that you are going to be disappointed if you get it in your mind that we will ever become metric—let alone in your lifetime.” I told him that I had a good understanding of the situation.

As I drove back to my home the next day, I thought about how fatalistic many, many people are about the possibility that the U.S. could become metric. As the black and white center stripes flashed past me on the interstate, and I contemplated the lack of change which has occurred over the last 150 years, I looked up at an oversize load and saw this:

PHi-4300mm-BridgeThe designation on the load was so out of context in the U.S., that my mind did not immediately process it. The realization came on slowly. The Greek letter phi is used to designate diameter on technical drawings. The diameter of the outer orange cover, on the oversize load has a diameter of 4300 mm, and it is clearly written and stated only in metric. The unit designation mm has no space between the integer and itself, which makes one suspect it was not made in the U.S.

What is this oversize load? I believe it is part of the pedestal of a wind generator on its way for assembly at a wind farm. I wondered how many people passing by would look at the label and realize that it states the diameter of the end is 4300 millimeters. Very few I suspect. Perhaps only me? Metric ever so slowly drips into the U.S. with the build-up rate of a stalagmite, but it is currently like a foreign language that is readily ignored, and never used. One cannot even purchase a millimeter only tape-measure in a U.S. hardware store. We are apparently impervious to change and insist that no one tell us how to do our job. The rest of the world is metric, and some like Australia and the UK use it very effectively for construction and manufacturing. We’ve chosen ignorance, which means that others will probably construct our future.

6 thoughts on “A Meter High By The Fourth of July

  1. Great post Maven. Although you didn’t state whether he was for or against metric, I believe that your exchange with the attorney helps to explain one of the main reasons that the U.S. hasn’t switched to the SI system. Lawyers. This past weekend I contacted both U.S. senators and my representative, I’m a resident of Alabama, and all 3 of them are lawyers, about 3 items: The deal with Iran, I’m for it; normalization of relations with Cuba, I’m for that also; and that the U.S. should adopt metric, I’m really in favor of that. I only received a reply from the representative. He stated several reasons why he will vote no on the Iran deal and did not mention the other 2 items. I’ve mentioned in previous comments that I have contacted the congressional delegates from Alabama with reasons for the U.S. to go metric. The current senior senator replied, several years ago, with several lame reasons; would have to educate the public, current system works fine, etc., as to why he would not support the move to adopt SI. I did point out to this senator that he has obtained Federal funding for buildings on several campuses in the Alabama college system that are dedicated to science and that these buildings have his name prominently displayed on them. I also pointed out that metric is the language of science. Perhaps that may be why I haven’t received a reply from him. If we could only send scientists to congress and leave the attorneys in the courtroom.

  2. I seldom make my appeal for U.S. metrication by seeking the assistance of scientists. Regardless of the magazine title, all of measurement is POPULAR science. All people are not scientists, but all people do occasionally invoke science for daily living, and, at the risk of being called a Jack Chick style proselytizer again (I once was called that when I last said this),, science is involved in measurement.. was it Jefferson who said that measurement is one of the “necessaries of life?” One does have to be a pee-aytche dee’d, white coated Dr. Frankenstein or Dr. Sabin or Dr. Asimov to be a measurer. One only has to be curious about determining quantities. and that could be on an Iowa pharm or in a Texas pharmacy. The metric system is THE MOST POPULAR measurement system in human history. Let America pursue such popular measurement.

    I LOVE THAT 3400 mm label–what a popular sight that could be along the fruited plain!

  3. If only you would have told that attorney, that the tens of thousands of Windmills you had seen across Iowa were designed, engineered, produced and service using the metric system. This technology is a testament to the greatness of the metric system, meaning that the people who use these windmills for their electrical needs are not involved in any part of the process of their existence.

    The money that is used to produce the windmills goes to a metric country and not only does a metric product blanket the landscape of Iowa, the means to transport the parts to its final resting place states clear as the nose on our faces its dimension in millimetres.

    I’m sure that many people do notice it and it hits them like a nail on the head that the metric system is here in the US at their expense. Their resistance gains them nothing.

  4. I use both systems constantly. Converting between is not difficult, though if precision is needed I use a calculator and additional digits to the right of the decimal point.

    Just the same, metric annoys me no end. Metric bears no natural and obvious connection to anything I can touch, feel, see or experience in daily life. Were it deliberately scaled with zeros to the right of the decimal point in conversions, perhaps it wouldn’t be such a nuisance. But 0.621? Or 25.4? Or 0.621? Who cooks up a newfangled measurement system without paying due attention to the ease of connecting it to the old one?

    A mile is easy. Have walked vast quantities of miles and I know them well. But a kilometer is not easy. Being neither half a mile nor two thirds. It is all of 0.621 miles, of which my feet can find no natural sensation other than “Nope, not there yet”.

    This is a level of imprecision I find personally intolerable. Sloppy it all is, damned sloppy.

    • Oh, darn it, I missed 39.37… one of my least favorites … **SIGH**

    • See:

      The Metric System for MacGyver

      Building a Metric Shed

      Metamorphosis and Millimeters

      From the current blog Metric Wishcraft:

      The metric system is very “body friendly.” a long pace is almost exactly a meter (1000 mm). I’ve done this and checked buildings with a laser. The dimensions are remarkably close. The distance between a person’s nose and the tips of their fingers is about a meter. The width of a male hand, Marciano’s hobby horse measurement poster unit, is generally 100 mm. So is the length of many index fingers. The width of a pinky fingernail is about 10 mm.

Comments are closed.