# Old Days

By The Metric Maven

I read a “fun fact” recently, that stated because metal expands when heated, the Eiffel Tower is actually 150-170 mm taller in the Summer than in the Winter. This fact reminded me of an old physics textbook, New Practical Physics by Black and Davis (1929 edition) that I’ve had for sometime but never really inspected. The section at the front on the metric system has an interesting graphic:

The authors of the book show a comparison of English and metric, with inches divided into tenths. This is interesting, because the general usage in the US (even in
High School or College physics classes) employs a common yardstick where inches are divided into fractions. It is very interesting that the textbook authors note both centimeters and millimeters are on the metric rule in their illustration. They seem to be falsely equate inches and tenths with centimeters and millimeters to provide a non-existent continuity between metric and Ye Olde English. Centimeters are the only labeled graduations, and it seems they do not contemplate using millimeters alone as an option. As I’ve said in the past, centimeters are so identified with inches in the US they are the default small metric unit, and a poor choice.

Black and Davis note that US currency is decimalized, but:

Our system of weights and measures, on the other hand, is not a decimal system, and is very inconvenient. Nevertheless, since the pound, foot, quart, gallon,
and bushel are still in general use in the United States and Great Britain, we must be familiar with them.

The basics of the metric system are touched upon and the definition of the:

Meter and yard. The meter is the distance between two lines on a metal bar (Fig. 2)

which is preserved in the vaults of the International Bureau of Weights and Measures near Paris.

Since the length of this metal bar changes a little with temperature, the distance is measured at the temperature of melting ice. A very accurate copy of the bar is deposited in the United States Bureau of Standards in Washington, D.C., and this copy is the legal meter of the United States.

In the United States the yard is legally defined as 3600/3937 of a meter.

My Father’s friend Mark was looking through a surveying kit, owned by his father, that appears to be from the 1930s, and found this interesting ruler:

One side has temperature correction for Lufkin steel measuring tapes. The difference for the 50 foot length is given on the left side and expanded for a 100 foot length on the right hand side. The wooden ruler itself is graduated in tenths of inches. I have no idea how prevalent rulers with 1/10th inch graduations were, but I suspect they were about as rare as they are now.

The back side:

Has hundredths of a foot, and is marked in tenths of a foot with integers. Below it is a scale with 1/16ths of an inch (of course millimeters would be 1/25). The value of a chain is a foot, divided into tenths and hundredths.

A footnote at the beginning of the textbook reminds us:

It was originally intended that the meter should be equal to one ten-millionth part of the distance from the equator to either pole of the earth, but it is impossible to reproduce an accurate copy of the meter on the basis of this definition. Later measurements have shown that the “mean polar quadrant” of the earth is about 10,002.100 meters.

First the Earth was used, and it had considerable difficulties as a standard, then metal bars, that needed to be measured at a precise temperature. Now the current definition is in terms of the speed of light in a vacuum, and is very, very accurate and reproducible. We still have some issues with better usage and simplification, but before that, we have to adopt the metric system exclusively in the US.

Related essay:

The Chain Gang

The Americans Who Defined The Meter

If you liked this essay and wish to support the work of The Metric Maven, please visit his Patreon Page and contribute. Also purchase his books about the metric system:

The first book is titled: Our Crumbling Invisible Infrastructure. It is a succinct set of essays  that explain why the absence of the metric system in the US is detrimental to our personal heath and our economy. These essays are separately available for free on my website,  but the book has them all in one place in print. The book may be purchased from Amazon here.

The second book is titled The Dimensions of the Cosmos. It takes the metric prefixes from yotta to Yocto and uses each metric prefix to describe a metric world. The book has a considerable number of color images to compliment the prose. It has been receiving good reviews. I think would be a great reference for US science teachers. It has a considerable number of scientific factoids and anecdotes that I believe would be of considerable educational use. It is available from Amazon here.

The third book is called Death By A Thousand Cuts, A Secret History of the Metric System in The United States. This monograph explains how we have been unable to legally deal with weights and measures in the United States from George Washington, to our current day. This book is also available on Amazon here.