By The Metric Maven
Extra Bulldog Edition
On Sunday, February 7, 1904, a fire began in Baltimore. It would take 1,231 firefighters to bring the fire under control and when it was over 1,500 buildings would be destroyed. One reason the fire burned unchecked for so long was the absence of national standards for fire-fighting equipment. Fire engines from Philadelphia, Washington D.C., Atlantic City, New York City and other metropolitan areas arrived on the scene. Unfortunately, many fire departments were unable to help as their hose couplings would not fit Baltimore’s fire hydrants. Those fire-fighters could only watch as the fire engulfed more and more of the city. It has been claimed that over 600 different sizes and variations of fire hose couplings existed at the time. This was similar to what French Engineer Charles Renard encountered with balloon cables, which caused him to develop preferred numbers.
The National Bureau of Standards was founded in 1901. Two metrication advocates championed its creation, James H. Southard, and John Shafroth. The Great Baltimore Fire directly demonstrated the need for mandatory standardization of fire-fighting equipment. Furthermore, no standards for building construction (building codes) existed, which allowed the fire to rapidly spread.
One would think that with the lessons of the Baltimore fire, and the establishment of a government agency for standards, that soon fire departments across the country would be induced to adopt national standards for fire-fighting equipment. On March 22, 1975 a fire started at Unit one of the Browns Ferry Nuclear Reactor. Plant employees attempted to extinguish the fire despite the fact that professional firemen from Athens, Alabama were on the scene. They mistakenly believed there was a problem with a nozzle at the end of a fire hose. This in turn caused the employees at the plant to request a replacement nozzle from the Athens fire department. The threads on the the fire department’s nozzle were not compatible with those of the fire fighting equipment purchased by Browns Ferry. Because of this, the nozzle would not stay on the end of the hose.
Well, certainly by now, well over a century after the founding of NIST, we would have national standards for fire couplings and this would not be a problem right? According to Wikipedia:
A national standard for fire hydrant and hose connections was adopted by the National Fire Protection Association. However, inertia remained, and conversion was slow; it still remains incomplete. One hundred years after the Baltimore Fire, only 18 of the 48 most populous American cities were reported to have installed national standard fire hydrants.[18] Hose incompatibility contributed to the Oakland Firestorm of 1991: although the standard hose coupling has a diameter of 2.5 inches (64 mm), Oakland‘s hydrants had 3-inch (76 mm) couplings.[19]
The idea of standardization strangely seems to be at the bottom of the priority list of many engineers. Those who have seen the movie Apollo 13 were reminded that the the carbon dioxide scrubbers for the Command Module and the LEM were not compatible. Fortunately, they were able to engineer their way to compatibility with a duct-tape solution. One should not rely on good fortune instead of planning and standardization, but in the US hoping for good fortune appears to be the standard back-up plan.
The lack of standardization in the US can and has cost lives. The acronym NIST stands for The National Institute of Standards and Technology. A year ago on May 24th 2013 (2013-05-24), on the Friday before Memorial Day weekend, a time when bureaucrats know that news media is generally not paying attention, the Director of NIST, Patrick D. Gallagher, penned a response to a citizens petition requesting that the metric system be adopted as the sole measurement system in the US. His response can be succinctly stated as he supports a “do your own thing” approach to standardization. Standardization is just too confining of a concept for a standards institute to embrace apparently. The title of his response, in case readers have forgotten, is Supporting American Choices on Measurement. It is well known to metric advocates that 95% of the world’s population uses the metric system. It would appear from just a cursory inspection of this fact, that one could, with reasonable certainty, state that the metric system is probably the most successful standard in the history of humanity. The director of the US government body which is tasked with standards, cannot even agree with a petition that the metric system should be the standard of the US?
When one is confronted with Dr. Gallagher’s assertion that the best standard is a lack of standards, and I remind you he is the director of the standards body of the US, one’s mind can only interpret the strange dark and contradictory humor of this apparently willful cognitive dissonance in but one way—–by resorting to a Monty Python Metaphor. One of the most famous of the Python’s sketches is The Cheese Shop. A patron walks into a cheese shop and requests some cheese. He requests all different manner of cheeses one by one, red Leicester? Tilsit? Caerphilly? Bel Paese? Red Windsor? Stilton? Ementhal? Gruyere? Norweigan Jarlsburg?….. These requests continue ad nausium until finally:
| Mousebender | Well let’s keep it simple, how about Cheddar? |
| Wensleydale | Well, I’m afraid we don’t get much call for it around these parts. |
| Mousebender | No call for it? It’s the single most popular cheese in the world! |
| Wensleydale | Not round these parts, sir. |
The exchange continues as the patron continues to request cheese after cheese until finally he states:
| Mousebender | It’s not much of a cheese shop really, is it? |
| Wensleydale | Finest in the district, sir. |
| Mousebender | And what leads you to that conclusion? |
| Wensleydale | Well, it’s so clean. |
| Mousebender | Well, it’s certainly uncontaminated by cheese. |
I could see a similar exchange with the Director of NIST acting as a standards proprietor where one could request mandatory metric industry standards for fire hose couplers, foot measurement, wire sizes, drill bit sizes, sheet metal thicknesses, medical weights and heights of humans, over the counter medical dosages and on and on. Each time the Director would parrot back “no.” And when one states “it’s not much of a Standards Institute is it?” this phrase might be met with “finest in the US sir.” Indeed, NIST appears to be quite clean, and uncontaminated with metric standards for the US. As in the sketch, the most popular world measurement standard, which is metric (aka Cheddar) is to be found nowhere as a standard in the standards shop.
It is hard to take NIST’s assertion that it is a standards institute seriously when it promotes the notion that a lack of standards is of exceeding utility to the US, and serves as an illustration of what makes our nation great. NIST is a Metric Cheese Shop, with no Cheddar, and it is completely uncontaminated by cheese as far as I can tell. It is sad that a scientific standards organization has been turned into a worldwide metric joke. At least the Python players had much better writing, and were actually funny while making important points. Patrick D. Gallagher’s response last year was so feckless, it was almost a killer joke to metric advocates. Now stop me if you’ve heard the one about the 600 choices of hose couplings available to the Baltimore fire department.
Postscript:
In 2012, I wrote an essay entitled Feral Units Endanger Our Health. In it I detailed the well known problem of the confusion between teaspoons and tablespoons. I pointed out that confusion between the two units can lead to a 3:1 or 1:3 dosage mistake. I then cited a column from JAMA, The Journal of The American Medical Association, dated September 20, 1902 (page 712), which is reproduced here in the upper left. The 1902 JAMA column advocates for mandatory implementation of the metric system through the Shafroth Bill. It was brought to my attention (thanks Dr. Sunshine) that just two days ago (2014-05-21) JAMA published a column which yet again addresses the same issue over 111 years later. The new column is entitled Group Urges Going Metric to Head off Dosing Mistakes and is authored by Bridget M. Kuehn (pp. E1-E2). The article opens with modern day examples of the problem:
The article goes on to state that “about 3000 to 4000 children are treated in emergency departments each year as a result of medication errors by a caregiver. Poison control centers in the United States also field approximately 10 000 calls each year about dosing confusion,..”
It has been said that a working definition of insanity is to do the same thing over and over and expecting a different outcome. This apocryphal quotation danced in my mind as I read “The CDC worked with the US Food and Drug Administration and the Consumer Healthcare Products Association to develop voluntary guidelines that were published published in 2011.” Our current answer to all measurement problems in the US is to adopt voluntary guidelines.
The suggestions are all mostly reasonable, such as including a dosage device with medication which does not use “unusual units” (I guess they mean metric?), adding zeros before decimal points (they could also adopt the whole number rule), and “dosing devices that are not substantially larger than the largest recommended dose of the medication.” Further it is stated:
The CDC recommends using only milliliters as a measure for liquid medications to avoid confusion between teaspoons and milliliters and avoiding relatively unfamiliar measures such as drams (a holdover from apothecaries). The CDC wants the dosing device with the appropriate unit of measurement included with the medication to avoid caregivers using a kitchen spoon or other implement that uses a different unit of measurement. Further, the enclosed device should only have the recommended doses labeled on it to make it even easier and safer to use.
The ISMP (Institute for Save Medication Practices) goes further than the CDC recommendations and argues for expressing a patient’s weight only in kilograms. The “ISMP, explained that because there are 2.2 kg per pound [sic], switching back and forth can lead to 2-fold errors in dosing of medications by weight.” Once again, in an echo of the 1902 JAMA column they point out that over the counter medications need to conform to these voluntary recommendations. The article also argues against the use of dual-scale dosage devices.
The article goes on:
Stephen C. Mullenix, RPh, senior vice president of public policy and industry relations at NCPDP, said the white paper is “a call to action” for pharmacists to make sure dosing is correct. They can verify with the prescribing physician to ensure they understand the dosing for a particular drug.
I’m sure the authors of the 1902 JAMA column also saw their words as a “call to action.” The big difference between then and now is the Meyer Brothers backed John Shafroth’s bill for mandatory metrication.
The article ends with the problems encountered when using electronic prescriptions. The example cited is of a doctor prescribing in milliliters and when it arrives electronically, the pharmacies software has a default setting to teaspoons. The article ends with a familiar modern refrain:
Converting all dosing and patient weights to metric is going to take time, Cohen acknowledged. But already he noted that soda cans and many other types of packaging already use metric units and that people will learn the conversions over time. “This isn’t something that is going to happen overnight,” he said.
The lack of mandatory metrication in this country is making people sick, costing our economy financially, and showing us for what we are, a nation that is willing to sacrifice people on an altar of ideology rather than acknowledge and engage with reality. Given our history, I suspect that in another 100 years we may still be waiting patiently for these voluntary recommendations to adhere.
If you liked this essay and wish to support the work of The Metric Maven, please visit his Patreon Page and contribute. Also purchase his books about the metric system:
The first book is titled: Our Crumbling Invisible Infrastructure. It is a succinct set of essays that explain why the absence of the metric system in the US is detrimental to our personal heath and our economy. These essays are separately available for free on my website, but the book has them all in one place in print. The book may be purchased from Amazon here.
The second book is titled The Dimensions of the Cosmos. It takes the metric prefixes from yotta to Yocto and uses each metric prefix to describe a metric world. The book has a considerable number of color images to compliment the prose. It has been receiving good reviews. I think would be a great reference for US science teachers. It has a considerable number of scientific factoids and anecdotes that I believe would be of considerable educational use. It is available from Amazon here.
The third book is called Death By A Thousand Cuts, A Secret History of the Metric System in The United States. This monograph explains how we have been unable to legally deal with weights and measures in the United States from George Washington, to our current day. This book is also available on Amazon here.
